DCAudioDIY.com
http://dcaudiodiy.com/phpBB3/

Free 10 inch Benchtop Drill Press
http://dcaudiodiy.com/phpBB3/viewtopic.php?f=7&t=2180
Page 1 of 1

Author:  David McGown [ September 20th, 2022, 8:53 am ]
Post subject:  Free 10 inch Benchtop Drill Press

I am giving away a Ryobi DP100 10" Benchtop drill press that I bought 20 years ago, but still works fine. I have used it for many audio projects over the years, drilling chassis top plates, terminal boards, circuit boards, drum sander for increasing tube socket hole diameter, etc. It sure beats using a hand held drill if that is all you have. For information, the size designation (10") refers to the ability to drill a hole in the center of a 10" wide plate, the spindle to support column clearance is therefore 5".

David

Author:  David McGown [ September 20th, 2022, 9:05 am ]
Post subject:  Re: Free 10 inch Benchtop Drill Press

Should add that this is pickup only. I live in Silver Spring, MD, about 1 mile north of the Glenmont Metro (not that I would recommend using Metro to pick up the drill press :lol: )

David

Author:  sirius815 [ September 20th, 2022, 6:42 pm ]
Post subject:  Re: Free 10 inch Benchtop Drill Press

I'll totally grab those (drill press and amp) from you,but normally take the motorcycle up. Can I grab them during my CAF? We'll be going on that Saturday

Author:  David McGown [ September 20th, 2022, 7:32 pm ]
Post subject:  Re: Free 10 inch Benchtop Drill Press

Couple of things.

1. I am not offering "free" amp, I do have some amps I have listed for sale, but they are loaned out presently I and I need to get them back, and they are, unfortunately for you, not for free. I think someone else had the free amp.
2. CAF weekend is problematic for me, since I have another event that weekend that I am involved with and have some responsibility in running at the same time. I will not be able to go to CAF. I am in town, but will be very difficult to get hold of me for any arrangements.

David

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/