Page 1 of 1
Free to a good home, open baffle line arrays...
Posted: October 20th, 2018, 3:43 pm
by Roscoe Primrose
18 4" full-range drivers per side, series connection of six groups of three drivers in parallel. I can't remember if the drivers are 4 or 8ohm, impedance will be either 8 or 16ohms. Baffles are curved so that all the drivers are the same distance from the listener with approx 10-12' listening distance. You'll need to measure the radius to be sure, it's been a few years and I don't remember the exact distance I cut them for... These drivers have a bit of a peak in the upper mid-range that you'll need to design/build a notch filter for...
Roscoe
Re: Free to a good home, open baffle line arrays...
Posted: October 21st, 2018, 8:18 am
by ratbagp
They remind me of arrays I built with the prior 69 cent wonders from Parts Express. I also have a box of the variety that Roscoe shows here but they didn't sound as good to me.
Actually I will need to get rid of them along with a lot of other stuff. It looks like we will move back to Australia next year and I will have to scale back. I will probably ask for advice at CAF, particularly at the Friday night soiree.
ray
Re: Free to a good home, open baffle line arrays...
Posted: October 23rd, 2018, 1:05 pm
by mix4fix
How would they sound at a C.A.F.?
Re: Free to a good home, open baffle line arrays...
Posted: October 23rd, 2018, 1:10 pm
by Roscoe Primrose
mix4fix wrote:How would they sound at a C.A.F.?
Probably about how they'd sound most other places
Re: Free to a good home, open baffle line arrays...
Posted: April 29th, 2019, 5:29 pm
by Roscoe Primrose
Last chance, or they go to the dump this weekend...
Roscoe
Re: Free to a good home, open baffle line arrays...
Posted: April 29th, 2019, 7:09 pm
by Pelliott321
I can see o bonfire