DCAudioDIY.com http://dcaudiodiy.com/phpBB3/ |
|
New Cartridge brake-in deadly http://dcaudiodiy.com/phpBB3/viewtopic.php?f=5&t=954 |
Page 7 of 7 |
Author: | tomp [ January 28th, 2018, 5:40 pm ] |
Post subject: | Re: New Cartridge brake-in deadly |
Cool video. Really shows what is going on. Lots of schmutz on the record also. |
Author: | J-ROB [ January 28th, 2018, 5:51 pm ] |
Post subject: | Re: New Cartridge brake-in deadly |
Nice job on that brass weight! Shoot for 9-12hz resonance, lower is better than higher but the ears must provide the final judgement. Wild oscillations at the resonant freq are not good. Presumably splitting the difference to ~10hz would give moderate oscillations and hopefully more open sound. At least you will know that the arm/cart combo is happy. With a heavier arm, that weight would probably be perfect but you have to adjust for the conditions at hand. |
Author: | Pelliott321 [ January 29th, 2018, 6:28 am ] |
Post subject: | Re: New Cartridge brake-in deadly |
Thanks guys It took way too long to make that brass weight. Screws for cartridge had to be counter sunk with a flat bottom. Screw hole for arm mount had to be threaded.at m3.50. This I all way smaller than I am use to and my shop is set up for wood working not this small stuff. Need to listen more and tweak arm adjustments before I make a 2gr lighter mount, but I suspect that is where it will end up |
Page 7 of 7 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |