DCAudioDIY.com http://dcaudiodiy.com/phpBB3/ |
|
Step-up ... http://dcaudiodiy.com/phpBB3/viewtopic.php?f=5&t=749 |
Page 2 of 2 |
Author: | brombo [ November 14th, 2016, 8:42 am ] |
Post subject: | Re: Step-up ... |
If the amplifier is sold state the output impedance (equivalent circuit model) should be much less that the speaker impedance. Then the critical factor is the L/R of the speaker. Do you have the L and R parameters of your tweeter? |
Author: | Jay Bala [ November 14th, 2016, 2:26 pm ] |
Post subject: | Re: Step-up ... |
Impedance: 6 ohms and the Re is 5.80 ohms. Thats about all the info I can get. |
Author: | brombo [ November 14th, 2016, 2:45 pm ] |
Post subject: | Re: Step-up ... |
The way to measure speaker inductance is to block the speaker (keep diaphragm from moving) and use an RLC meter at a frequency well above the resonant frequency of the speaker. See link for software RLC meter - http://www.daqarta.com/dw_0o0z.htm |
Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |