....and this was done with a hammer and chisel. What's your point?
| DCAudioDIY.com http://dcaudiodiy.com/phpBB3/ |
|
| Step Drill Performance Test http://dcaudiodiy.com/phpBB3/viewtopic.php?f=5&t=2077 |
Page 1 of 2 |
| Author: | FerdinandII [ October 4th, 2021, 2:34 pm ] |
| Post subject: | Step Drill Performance Test |
Many of us use step drills for making tube socket holes in amplifier chassis. If you have struggled with the performance of step bits, it might be worthwhile to buy a better one. Which one, you ask? Best Step Drill Bit? Let's find out! DeWalt, Milwaukee, Bosch, Irwin, Diablo, Makita, Bauer, TEMO https://www.youtube.com/watch?v=nGbMQul6_Bc BTW, you know what I love about this guy? He talks fast..... |
|
| Author: | Stuart Polansky [ October 4th, 2021, 4:59 pm ] |
| Post subject: | Re: Step Drill Performance Test |
Project Farm is a great source for actual real-world testing of all sorts of tools and hardware. Love it. and "We're gonna test that"! |
|
| Author: | ratbagp [ October 4th, 2021, 5:08 pm ] |
| Post subject: | Re: Step Drill Performance Test |
That video was really good. A fast and efficient video. ray |
|
| Author: | Pelliott321 [ October 4th, 2021, 6:24 pm ] |
| Post subject: | Re: Step Drill Performance Test |
I like those vids also I been using the HF step drill for quite awhile It was the only thing that would drill. 1/2 inch hole in a stainless steel chassis I had |
|
| Author: | SoundMods [ October 6th, 2021, 6:09 pm ] |
| Post subject: | Re: Step Drill Performance Test |
For doing DIY tube amps using step drills is a very tedious crude way to go about it. Chassis punches get the job cleanly and with little effort or mess. https://www.zoro.com/milwaukee-milwauke ... /G6191762/ |
|
| Author: | tomp [ October 6th, 2021, 6:30 pm ] |
| Post subject: | Re: Step Drill Performance Test |
I have been using Greenlee punches for years and love them. Tom |
|
| Author: | Roscoe Primrose [ October 6th, 2021, 7:15 pm ] |
| Post subject: | Re: Step Drill Performance Test |
tomp wrote: I have been using Greenlee punches for years and love them. Tom Me too.... Roscoe |
|
| Author: | FerdinandII [ October 6th, 2021, 8:58 pm ] |
| Post subject: | Re: Step Drill Performance Test |
....and this was done with a hammer and chisel. What's your point?
|
|
| Author: | DaveR [ October 6th, 2021, 9:51 pm ] |
| Post subject: | Re: Step Drill Performance Test |
FerdinandII wrote: ....and this was done with a hammer and chisel. What's your point? And an incredible amount of patience and skill. |
|
| Author: | radiorich [ November 8th, 2021, 4:53 pm ] |
| Post subject: | Re: Step Drill Performance Test |
Hello FerdinandII, I watch him from time to time and this was a great review I too have a few in my tool set my favorite is my Klein brand I use my GreenLee hole punches a lot too . Sincerely Rich |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|