DCAudioDIY.com

DC Area Audio DIYer's Community
It is currently March 28th, 2024, 8:48 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: When things go very bad
PostPosted: January 11th, 2019, 2:44 pm 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1697
Location: Baltimore MD
I took on a simple repair job for a client. I had to replace a USB connector on a USB receiver board on a music server.
I did not take pics of the mangled connector befor I removed it. but here is the completed repair.


Attachments:
fix1.jpg
fix1.jpg [ 228.1 KiB | Viewed 9853 times ]
Top
 Profile  
 
PostPosted: January 11th, 2019, 2:49 pm 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1697
Location: Baltimore MD
when I was putting things together and connecting a 12 connector cable to the other side of the board the socket just popped off.
Attachment:
fix2.jpg
fix2.jpg [ 333.22 KiB | Viewed 9852 times ]

Attachment:
fix3.jpg
fix3.jpg [ 191.48 KiB | Viewed 9852 times ]

here is a close up
Attachment:
fix4.jpg
fix4.jpg [ 233.65 KiB | Viewed 9852 times ]


Top
 Profile  
 
PostPosted: January 11th, 2019, 2:53 pm 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1697
Location: Baltimore MD
To me the pads look like cold solder joints.
Any way it was a pain getting this soldered back on
Attachment:
fix5.jpg
fix5.jpg [ 227.14 KiB | Viewed 9852 times ]


Instead of a 15 minute repair it was a 30 minute repair

Don't know if I will recover from this disaster today


Top
 Profile  
 
PostPosted: January 11th, 2019, 3:43 pm 
Offline
User avatar

Joined: July 24th, 2015, 4:17 pm
Posts: 1701
Location: Parkville, Maryland
Pelliott321 wrote:
when I was putting things together and connecting a 12 connector cable to the other side of the board the socket just popped off.
Attachment:
fix2.jpg

Attachment:
fix3.jpg

here is a close up
Attachment:
fix4.jpg



HOLY CRAP!!!! Cold solder joints all! Murphy's Law at work.

_________________
Walt


Top
 Profile  
 
PostPosted: January 11th, 2019, 6:05 pm 
Offline
User avatar

Joined: February 28th, 2013, 3:31 pm
Posts: 1780
If anyone ever needs to repair a board with surface mount components I have a hot air re-flow station you can use.


Top
 Profile  
 
PostPosted: January 11th, 2019, 10:34 pm 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1697
Location: Baltimore MD
One does not need fancy equipment to do surface mount work


Top
 Profile  
 
PostPosted: January 12th, 2019, 10:17 am 
Offline
User avatar

Joined: February 19th, 2017, 9:43 am
Posts: 530
Pelliott321 wrote:
One does not need fancy equipment to do surface mount work


No, but it sure helps make it much easier.

_________________
I have too much stuff - https://www.pleasebuymystuff.com


Top
 Profile  
 
PostPosted: January 12th, 2019, 12:37 pm 
Offline
User avatar

Joined: February 28th, 2013, 3:31 pm
Posts: 1780
DaveR wrote:
Pelliott321 wrote:
One does not need fancy equipment to do surface mount work


No, but it sure helps make it much easier.

Amen to that


Top
 Profile  
 
PostPosted: January 13th, 2019, 8:59 am 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1697
Location: Baltimore MD
Part of my problem besides being _______(you an fill in the blank), is I really do not understand how the hot air thingy works or how to use one. I guess this is a good one for YouTube


Top
 Profile  
 
PostPosted: January 13th, 2019, 1:06 pm 
Offline
User avatar

Joined: July 24th, 2015, 4:17 pm
Posts: 1701
Location: Parkville, Maryland
Pelliott321 wrote:
Part of my problem besides being _______(you an fill in the blank), is I really do not understand how the hot air thingy works or how to use one. I guess this is a good one for YouTube



I don't envy your task -- I am imitated by surface-mount anything. Specialized equipment is required.

During manufacture -- the parts are loaded using robotics and then flow-soldered as a unit. Apparently, the device you are working on would have benefited by a hole-through version of the multi-pin connector. Looking at your photos it seems to me that you can clean the pads and connections of solder -- set the connector in place and hand solder each pad individually with a solder pencil.

I would wear a jewelers bi-optic magnifier to get a close look while working. I believe you can pull it off. Once you solder tack the first pin -- that will anchor the connector which will enable working on the rest of them. I think if you try to re-flow them as a group you may still end up with cold joints that will not be reliable.

_________________
Walt


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group