November 16th, 2017, 11:38 am
November 16th, 2017, 11:51 am
Pelliott321 wrote:For all you horny guys:
I am under the impression that the horn size (largest dimension at the horny end) sort of determines the low frequency the horn can willingly produce.
If I am right (I am know to be wrong some of the time), is there any advantage to using a horn that is considerably larger than the 3db down point of the xover being used for that horn?
November 16th, 2017, 11:59 am
November 16th, 2017, 12:06 pm
November 16th, 2017, 12:18 pm
Pelliott321 wrote:For all you horny guys:
I am under the impression that the horn size (largest dimension at the horny end) sort of determines the low frequency the horn can willingly produce.
If I am right (I am know to be wrong some of the time), is there any advantage to using a horn that is considerably larger than the 3db down point of the xover being used for that horn?
November 16th, 2017, 12:35 pm
November 16th, 2017, 12:42 pm
November 16th, 2017, 12:55 pm
Pelliott321 wrote:Thanks guys
The reason for the question is that there was a vendor at CAF that used a 3ft(diameter) horn for a tweeter(xover point 1200 hz)
I was just curious
November 16th, 2017, 1:10 pm
November 29th, 2017, 8:37 pm