DCAudioDIY.com http://dcaudiodiy.com/phpBB3/ |
|
Roscoe's SLOBs http://dcaudiodiy.com/phpBB3/viewtopic.php?f=4&t=903 |
Page 2 of 2 |
Author: | Cogito [ May 24th, 2017, 2:33 pm ] |
Post subject: | Re: What do you know about SLOBs? |
Roscoe Primrose wrote: I'll know more soon I still need to build the other one Which one do you like better? |
Author: | Roscoe Primrose [ May 24th, 2017, 2:46 pm ] |
Post subject: | Re: What do you know about SLOBs? |
Cogito wrote: Which one do you like better? The SLOB. It's built so the main baffle is easily replaceable, I plan to try it with the 414/802-32B on a baffle at some point. I also have 12" co-axials by University, Tannoy & B&C to try, along with an 8" co-axial and several 8" full-range drivers. So many drivers, so little time Roscoe |
Author: | Roscoe Primrose [ May 24th, 2017, 5:59 pm ] |
Post subject: | Re: What do you know about SLOBs? |
These pics are a little overdue, but here they are anyway.... I made the wings a bit deeper, and rounded the corners to help me avoid injury (again) I also changed the subs to the Dayton PA-465s, which have a larger Xmax & a bit higher qts, the bass is quite a bit more solid now. I could live with these for a while Roscoe |
Author: | Roscoe Primrose [ August 31st, 2017, 9:51 am ] |
Post subject: | Re: What do you know about SLOBs? |
Sometimes it's the simple things that make a huge difference... Before adding the dowels as cross-braces the wings flapped so much with low bass playing that you could see it, now you can barely feel it. I think I'm going to need to redo the bass EQ now Roscoe |
Author: | Cogito [ September 2nd, 2017, 8:07 pm ] |
Post subject: | Re: What do you know about SLOBs? |
Yes, there is a huge improvement in the bass since I was there few months ago...... |
Author: | Roscoe Primrose [ October 22nd, 2017, 11:21 am ] |
Post subject: | Roscoe's SLOBs |
Going to move the posts specific to my SLOBs here from the What do you know about SLOBS? thread, and add new ones as more development occurs.. Roscoe |
Author: | Roscoe Primrose [ October 22nd, 2017, 8:17 pm ] |
Post subject: | Re: Roscoe's SLOBs |
OK, so I'm not the guy you need to see about finishing wood... But, I think they look a bit better than bare plywood... Roscoe |
Author: | Roscoe Primrose [ October 24th, 2017, 7:19 pm ] |
Post subject: | Re: Roscoe's SLOBs |
Ok, back together after a second coat of stain on the baffles. Hopefully we won't scare anyone away this year just based on cosmetics alone.... |
Author: | HAL [ October 24th, 2017, 9:27 pm ] |
Post subject: | Re: Roscoe's SLOBs |
Looks good to me. Ready for the show! |
Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |