Took lots of photos as I took the Quad57 apart. Even though the wiring is pretty simple the photos mad reassembly easier
| Attachments: |
|
oldxformer1.jpg [ 255.14 KiB | Viewed 20519 times ] |
| DCAudioDIY.com http://dcaudiodiy.com/phpBB3/ |
|
| Another project started http://dcaudiodiy.com/phpBB3/viewtopic.php?f=4&t=815 |
Page 2 of 4 |
| Author: | Pelliott321 [ August 5th, 2017, 4:55 pm ] | ||
| Post subject: | Re: Another project started | ||
Took lots of photos as I took the Quad57 apart. Even though the wiring is pretty simple the photos mad reassembly easier
|
|||
| Author: | Pelliott321 [ August 5th, 2017, 5:25 pm ] | ||
| Post subject: | Re: Another project started | ||
Transfomer Mods New Speaker Terminals
|
|||
| Author: | Pelliott321 [ August 5th, 2017, 5:54 pm ] | ||
| Post subject: | Re: Another project started | ||
Reassembly
|
|||
| Author: | SoundMods [ August 5th, 2017, 7:35 pm ] |
| Post subject: | Re: Another project started |
Paul: Looking at your photos it was obvious to me that someone had done some work prior to your getting the speakers. The high-voltage caps on the audio transformers are not what Peter Walker used. |
|
| Author: | Pelliott321 [ August 5th, 2017, 9:32 pm ] |
| Post subject: | Re: Another project started |
It was also obvious to me that work was done. The reason I had to replace the high voltage wires on the bass panels is because they only holding on with one strand or two and they were too short to reuse. Also the way the dust covers were ripped up one could tell that no care was taken to protect them while working on the speakers. Also a lot of screws were missing and the ones that were there were wrong |
|
| Author: | tomp [ August 6th, 2017, 9:04 am ] |
| Post subject: | Re: Another project started |
SoundMods wrote: Two big-ass 18-inch sub-woofers. The Decca part was the ribbon tweeters without their horns. There are better ribbons out there now with better sound and efficiency. Do the Hartleys have the modern pleated spiders or the four legged "S" shaped spiders? |
|
| Author: | tomp [ August 6th, 2017, 9:05 am ] |
| Post subject: | Re: Another project started |
Pelliott321 wrote: It was also obvious to me that work was done. The reason I had to replace the high voltage wires on the bass panels is because they only holding on with one strand or two and they were too short to reuse. Also the way the dust covers were ripped up one could tell that no care was taken to protect them while working on the speakers. Also a lot of screws were missing and the ones that were there were wrong If you need some high voltage wire I have test probe wire in both red and black. |
|
| Author: | SoundMods [ August 6th, 2017, 11:04 am ] |
| Post subject: | Re: Another project started |
The Hartleys had the S-shaped spiders. |
|
| Author: | Pelliott321 [ August 6th, 2017, 12:06 pm ] |
| Post subject: | Re: Another project started |
I got my high voltage wire off of ebay, But I may need more I have three more pairs of 57's to rebuild for Gary. |
|
| Author: | tomp [ August 6th, 2017, 5:11 pm ] |
| Post subject: | Re: Another project started |
Let me know how much you need. |
|
| Page 2 of 4 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|