A place to discuss member's DIY audio projects & post pictures/schematics. NOTE: There is a limit of 2MB per attachment, and a maximum of 3 attachments per message. If you need to post more than 3 attachments, just add another message.
March 30th, 2016, 9:58 am
So -- after all is said and done -- is vinyl worth the effort? YOU BET!!!
March 30th, 2016, 12:09 pm
Roscoe has a good point. Same probably goes for the varying thicknesses of the vinyl, which much is made of.
March 30th, 2016, 12:19 pm
Theoretically vinyl thickness could have an impact, but I have not noticed any negatives going from a standard LP that my adjustment is based on to a 180 or 200 gram LP.
Actually, the thicker stuff is typically "audiophile" stuff and sounds better (if mastered and cut well) than the more pedestrian efforts.
March 30th, 2016, 12:56 pm
Not talking about vinyl quality just how thickness affects the vta which affects the sound. Pressing quality is just another variable in the insanity
March 30th, 2016, 12:57 pm
What Roscoe is talking about is the fore and aft movement of the rrest position of the stylus, not the VTA.
March 30th, 2016, 1:01 pm
SoundMods wrote:So -- after all is said and done -- is vinyl worth the effort? YOU BET!!!
Vinyl is worth the effort irrespective of any quality differences. There is a lot of great music out there that has never gone digital. To ignore that because of any particular technology technology is short changing yourself.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.