DCAudioDIY.com
http://dcaudiodiy.com/phpBB3/

Open Baffle Planar servo sub speaker project
http://dcaudiodiy.com/phpBB3/viewtopic.php?f=4&t=586
Page 39 of 40

Author:  mix4fix [ March 23rd, 2019, 11:10 am ]
Post subject:  Re: Open Baffle Planar servo sub speaker project

Does that mean Roscoe paid him because there are several DIY room videos?

Author:  Pelliott321 [ March 24th, 2019, 8:59 am ]
Post subject:  Re: Open Baffle Planar servo sub speaker project

No early on Peter was promoting himself by doing general stuff. Now a days it’s only by subscription. He may do one on spec trying to rain in a sucker

Author:  HAL [ March 24th, 2019, 11:54 am ]
Post subject:  Re: Open Baffle Planar servo sub speaker project

Paul,
Thanks for the feedback.

Author:  mix4fix [ March 24th, 2019, 2:28 pm ]
Post subject:  Re: Open Baffle Planar servo sub speaker project

So, he charges for posting them on YouTube and collects the revenue for posting them on YouTube?

Author:  Pelliott321 [ March 25th, 2019, 6:31 am ]
Post subject:  Re: Open Baffle Planar servo sub speaker project

His fee is for video production and posting on his web site. He uses YouTube as a place to store and serv up the video

Author:  HAL [ March 26th, 2019, 10:44 pm ]
Post subject:  Re: Open Baffle Planar servo sub speaker project

The Monoliths are setup and The Megaliths are close to being fully setup in the labs. :)

Had to get Greg to rebuild the 8 ribbons for The Megaliths and he updated them at the same time. Now to do some new measurements for an updated digital crossover design.

Will see what happens.

Author:  mix4fix [ March 27th, 2019, 3:05 pm ]
Post subject:  Re: Open Baffle Planar servo sub speaker project

When are you going to have a meet?

Author:  HAL [ March 28th, 2019, 5:17 pm ]
Post subject:  Re: Open Baffle Planar servo sub speaker project

I had one. It was at CAF2018 in a big room.

You were there.

Author:  HAL [ April 16th, 2019, 10:06 pm ]
Post subject:  Re: Open Baffle Planar servo sub speaker project

After CAF2018 took feedback from folks and did a redesign of The Monoliths digital crossover. Now all crossovers are acoustic 8th order Linkwitz-Riley alignment.

The system now sounds much cleaner and handles more power.

Author:  HAL [ August 5th, 2019, 7:54 am ]
Post subject:  Re: Open Baffle Planar servo sub speaker project

Got the latest GR-NEO3 planar tweeters installed in a new set of baffles for testing. Slightly larger than the original BG NEO3-PDR tweeters.

Now wired up for listening and digital crossover adjustment.

Attachments:
GR-NEO3 install-small.jpg
GR-NEO3 install-small.jpg [ 250.73 KiB | Viewed 28363 times ]

Page 39 of 40 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/