A place to discuss member's DIY audio projects & post pictures/schematics. NOTE: There is a limit of 2MB per attachment, and a maximum of 3 attachments per message. If you need to post more than 3 attachments, just add another message.
September 2nd, 2018, 12:56 pm
Or you could seal it with shellac and sand it before sending it off for painting.
September 2nd, 2018, 12:58 pm
PS: For finishing if anyone wants to borrow a good hvlp spray gun I have one.
September 2nd, 2018, 1:18 pm
brombo wrote:Or you could seal it with shellac and sand it before sending it off for painting.
The icing seals like shellac but has more substance to help with any imperfections. It goes on a bit thicker giving more sanding depth. You would not have to layer and sand as many times as with shellac.
September 8th, 2018, 5:10 pm
The Monoliths are setup and making music.
Trying to get access to a larger space to make measurements with CLIO to see what other things are needed.
- Attachments
-
October 26th, 2018, 3:38 pm
Rich,
Do you need help Thursday evening? I can come in around 6PM.
Shashi
October 26th, 2018, 4:20 pm
Shashi,
Appreciate the offer!
I have folks coming early to help with load-in Thursday. I think the wife is stealing me for dinner around 6PM.
Send me a msg here if you are around the hotel and will meet up if possible on Thursday night.
Best,
Rich
October 26th, 2018, 4:21 pm
This is what the speaker look like now for the show.
- Attachments
-
October 26th, 2018, 5:42 pm
How are you going to fill a room that is 30x40 with a 20 foot ceiling
October 27th, 2018, 12:56 am
The room is 38'x50'x12'.
Bringing room acoustic treatments and do the best I can.
October 27th, 2018, 9:06 am
I think the Plasa Ballrooms have a higher ceiling that 12 feet.
Last year Carver had thier Amazing's and it was pretty bad. It's one of the reasons they are not back
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.