The Monoliths are setup and making music.
Trying to get access to a larger space to make measurements with CLIO to see what other things are needed.
| Attachments: |
|
#15.jpg [ 389.56 KiB | Viewed 40157 times ] |
| DCAudioDIY.com http://dcaudiodiy.com/phpBB3/ |
|
| Open Baffle Planar servo sub speaker project http://dcaudiodiy.com/phpBB3/viewtopic.php?f=4&t=586 |
Page 36 of 40 |
| Author: | brombo [ September 2nd, 2018, 12:56 pm ] |
| Post subject: | Re: Open Baffle Planar servo sub speaker project |
Or you could seal it with shellac and sand it before sending it off for painting. |
|
| Author: | brombo [ September 2nd, 2018, 12:58 pm ] |
| Post subject: | Re: Open Baffle Planar servo sub speaker project |
PS: For finishing if anyone wants to borrow a good hvlp spray gun I have one. |
|
| Author: | tomp [ September 2nd, 2018, 1:18 pm ] |
| Post subject: | Re: Open Baffle Planar servo sub speaker project |
brombo wrote: Or you could seal it with shellac and sand it before sending it off for painting. The icing seals like shellac but has more substance to help with any imperfections. It goes on a bit thicker giving more sanding depth. You would not have to layer and sand as many times as with shellac. |
|
| Author: | HAL [ September 8th, 2018, 5:10 pm ] | ||
| Post subject: | Re: Open Baffle Planar servo sub speaker project | ||
The Monoliths are setup and making music. Trying to get access to a larger space to make measurements with CLIO to see what other things are needed.
|
|||
| Author: | Cogito [ October 26th, 2018, 3:38 pm ] |
| Post subject: | Re: Open Baffle Planar servo sub speaker project |
Rich, Do you need help Thursday evening? I can come in around 6PM. Shashi |
|
| Author: | HAL [ October 26th, 2018, 4:20 pm ] |
| Post subject: | Re: Open Baffle Planar servo sub speaker project |
Shashi, Appreciate the offer! I have folks coming early to help with load-in Thursday. I think the wife is stealing me for dinner around 6PM. Send me a msg here if you are around the hotel and will meet up if possible on Thursday night. Best, Rich |
|
| Author: | HAL [ October 26th, 2018, 4:21 pm ] | ||
| Post subject: | Re: Open Baffle Planar servo sub speaker project | ||
This is what the speaker look like now for the show.
|
|||
| Author: | Pelliott321 [ October 26th, 2018, 5:42 pm ] |
| Post subject: | Re: Open Baffle Planar servo sub speaker project |
How are you going to fill a room that is 30x40 with a 20 foot ceiling |
|
| Author: | HAL [ October 27th, 2018, 12:56 am ] |
| Post subject: | Re: Open Baffle Planar servo sub speaker project |
The room is 38'x50'x12'. Bringing room acoustic treatments and do the best I can. |
|
| Author: | Pelliott321 [ October 27th, 2018, 9:06 am ] |
| Post subject: | Re: Open Baffle Planar servo sub speaker project |
I think the Plasa Ballrooms have a higher ceiling that 12 feet. Last year Carver had thier Amazing's and it was pretty bad. It's one of the reasons they are not back |
|
| Page 36 of 40 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|