DCAudioDIY.com
http://dcaudiodiy.com/phpBB3/

Converting Magnepan 1.7 planars to a DSP Crossover
http://dcaudiodiy.com/phpBB3/viewtopic.php?f=4&t=2290
Page 5 of 5

Author:  HAL [ March 28th, 2024, 8:35 pm ]
Post subject:  Re: Converting Magnepan 1.7 planars to a DSP Crossover

WOOHOO! :)

They are playing music, just without the super tweeters!

Since one super tweeter foil element is open circuit, did the DSP crossover to run as we 3-way adding the servo subs. The tweeter run 400Hz to 20KHz. Also added time alignment for the 3 planars and main panels to subs to finish it up.

Also figured out both the servo amp and the Class D amps are inverting polarity. The dspNexus 2x8 has an inverter for inputs, so just used the inverted USB setting. All drivers now in the same polarity.

First song, RUSH : 2112, that sounded very good! :)

Attachments:
1_7PlayingMusic.jpg
1_7PlayingMusic.jpg [ 328.51 KiB | Viewed 6362 times ]

Page 5 of 5 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/