A place to discuss member's DIY audio projects & post pictures/schematics. NOTE: There is a limit of 2MB per attachment, and a maximum of 3 attachments per message. If you need to post more than 3 attachments, just add another message.
October 10th, 2022, 8:34 pm
brombo wrote:A drawing and dimensions please.
3 inch by 3 3/4 inch.
I don't have any extra loose binding posts. My plan was to use nuts-n-bolts on the plastic, but it may not go as I was planning.
brombo wrote:Here is how I did my speaker terminals. I can help if you want. I used a small milling machine to drill the holes for the banana jacks accurately -
SpeakerTerminals.jpg
I live in Silver Spring.
I like what you did. I will figure out a time to come up.
October 10th, 2022, 9:01 pm
I have a lot of spare dual binding post and dual banana jacks if you want any.
October 10th, 2022, 10:49 pm
What will frequency will a 470 mF capacitor do?
October 11th, 2022, 6:50 am
Here is a link to a web site where you can put in the impedances of the drivers and the desired crossover frequency and it will give you the values need for the crossover.
https://www.v-cap.com/speaker-crossover ... Calculator
October 11th, 2022, 7:03 am
With a 6 ohm tweeter a 470uF cap will give a crossover at about 56 Hz. In other words WAYYYY too big a cap.
October 11th, 2022, 12:34 pm
I think it is mF, not uF.
October 11th, 2022, 1:19 pm
mF would be milli-farads which would be enormous.
October 12th, 2022, 9:03 pm
Is there a reverse calculator that will give you a frequency of a certain component?
October 12th, 2022, 9:50 pm
November 1st, 2022, 3:54 pm
brombo wrote:I have a lot of spare dual binding post and dual banana jacks if you want any.
I will schedule something, possibly next week.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.