DCAudioDIY.com http://dcaudiodiy.com/phpBB3/ |
|
Buffer Ampifier http://dcaudiodiy.com/phpBB3/viewtopic.php?f=4&t=2100 |
Page 2 of 2 |
Author: | brombo [ December 2nd, 2021, 5:45 pm ] |
Post subject: | Re: Buffer Ampifier |
My order from DigKey arrives Friday including some surface mount LME49720 op amps and some surface mount to dip8 adapters. I want to be able to change op amps without unsoldering from the circuit board. I have installed KiCad for linux to lay out the circuit board. Has anyone in the group used that software before? |
Author: | brombo [ December 2nd, 2021, 6:09 pm ] |
Post subject: | Re: Buffer Ampifier |
Do any of you have a recommendation for a usb oscilloscope? One that could run under linux would be preferred. |
Author: | Grover Gardner [ December 2nd, 2021, 11:57 pm ] |
Post subject: | Re: Buffer Ampifier |
brombo wrote: Do any of you have a recommendation for a usb oscilloscope? One that could run under linux would be preferred. I love my Picoscope. David McGown has one too, I think. The base 2204 is very good for general audio use, the 2206 offers more bandwidth in the built-in signal generator, up to 1MHz. |
Author: | tomp [ December 3rd, 2021, 7:43 am ] |
Post subject: | Re: Buffer Ampifier |
Although more expensive, you might want to consider a separate oscilloscope. This way you don't tie up your computer while taking measurements. I sometimes use my laptop to run the application ARTA for speaker or electronics measurements while looking at the waveform on the scope. Here is a very competent reasonably priced scope that is about twice the price of the cheapest Picoscope. https://www.amazon.com/Siglent-Technolo ... 967&sr=8-4 I have used one of these for several years now and have had great results. It replaced a basic Tek scope but this one has lots more functions for about 1/3 the price. Tom |
Author: | brombo [ December 3rd, 2021, 8:14 am ] |
Post subject: | Re: Buffer Ampifier |
I have six computers, my mainframe, three htpc's, a test bed for trying new things out, and a laptop. I will use the laptop with the pico scope (it dual boots ubuntu 20.04 and win 10). Here is the mainframe. It runs ubuntu 20.04 and win 10 as a virtual machine using vmware player (free). Attachment:
|
Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |