DCAudioDIY.com

DC Area Audio DIYer's Community
It is currently March 28th, 2024, 4:33 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Klipsch Cornwall ll’s
PostPosted: July 26th, 2020, 8:05 am 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1697
Location: Baltimore MD
So I finally dragged these out to check them out to get them ready to sell. One of them had something rattling around inside. I removed the woofer screws but I could not it out, it was stuck hard and not wanting to damage anything I removed the mid horn, which came out easily.
I found the mid horn s wires just dangling and one of the coils had come loose from the crossover board.
That was fixed pretty easily and a quick inspection I found that the box is well made with one brace between the front baffle and rear. There was no filler, which surprised me. These are pretty heavy.
I hooked them up in place of my soon to go Spatial’s with the EleKit Tu-8800 KT88 SET and took a listen.
Well guess what they sounded just like a Klipsch. I can certainly see the how and why there were so many companies started just to mod and repair Klipsch speakers. Yes the date on these speakers is 1987 and maybe they were special to some back then. The crossover has an electrolytic cap in the woofer section and 10 cent caps elsewhere. The Iron core inductors are ok except for the tweeter..
So I cleaned up the cabinets and gave them some elbow grease with some wax and Steve wool. They look good which is all I care about because hopefully they will move quickly.
Asking price on the web for similar shape examples range from a low $1k to $2500. I want to move them so I will try for less.


Top
 Profile  
 
PostPosted: July 26th, 2020, 10:48 am 
Offline
User avatar

Joined: July 24th, 2015, 4:17 pm
Posts: 1701
Location: Parkville, Maryland
Pelliott321 wrote:
So I finally dragged these out to check them out to get them ready to sell. One of them had something rattling around inside. I removed the woofer screws but I could not it out, it was stuck hard and not wanting to damage anything I removed the mid horn, which came out easily.
I found the mid horn s wires just dangling and one of the coils had come loose from the crossover board.

Despite their dismal sound quality I thought their quality control was more on point. You just said a lot about the Klipsch organization.

_________________
Walt


Top
 Profile  
 
PostPosted: July 26th, 2020, 11:30 am 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1697
Location: Baltimore MD
Yes those plastic horns are deadly. Could use a lot of dampening. I am wondering if that Flex paste you see advertised so much would work.
Its expensive $20 for a pint, but dries to a tough rubber consistency


Top
 Profile  
 
PostPosted: July 26th, 2020, 11:49 am 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1697
Location: Baltimore MD
Attachment:
all_1_5in_web.jpg
all_1_5in_web.jpg [ 256.51 KiB | Viewed 8641 times ]


Attachments:
all_2_5in_web.jpg
all_2_5in_web.jpg [ 159.78 KiB | Viewed 8641 times ]
Top
 Profile  
 
PostPosted: July 26th, 2020, 11:51 am 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1697
Location: Baltimore MD
Attachment:
Left_Top_5in_web.jpg
Left_Top_5in_web.jpg [ 55.47 KiB | Viewed 8641 times ]

Attachment:
Left_side.jpg
Left_side.jpg [ 68.87 KiB | Viewed 8641 times ]

Attachment:
Woof1_5inch_web.jpg
Woof1_5inch_web.jpg [ 167.46 KiB | Viewed 8641 times ]


Top
 Profile  
 
PostPosted: July 26th, 2020, 11:52 am 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1697
Location: Baltimore MD
Attachment:
Squak1_5inch_web.jpg
Squak1_5inch_web.jpg [ 131.6 KiB | Viewed 8641 times ]

Attachment:
Term1_5inc_web.jpg
Term1_5inc_web.jpg [ 202.38 KiB | Viewed 8641 times ]


Top
 Profile  
 
PostPosted: July 26th, 2020, 12:05 pm 
Offline
Site Admin
User avatar

Joined: February 28th, 2013, 10:38 am
Posts: 1682
Pelliott321 wrote:
Attachment:
Term1_5inc_web.jpg


I find it hard to believe Klipsch put this in crooked like that. Someone had to have had it out at some point....

This is a great project for someone who wants to take the time and effort to build decent crossovers, and possibly do something different with the horns if the price is right.

_________________
I can explain it to you, but I can’t understand it for you.


Top
 Profile  
 
PostPosted: July 26th, 2020, 1:20 pm 
Offline
User avatar

Joined: July 24th, 2015, 4:17 pm
Posts: 1701
Location: Parkville, Maryland
Pelliott321 wrote:
Yes those plastic horns are deadly. Could use a lot of dampening. I am wondering if that Flex paste you see advertised so much would work.
Its expensive $20 for a pint, but dries to a tough rubber consistency

Forget that -- it's reactive. I recommend Q-Pads that are used to dampen automobile panels. They are a lead-impregnated self-adhesive pad that's easily cut with kitchen shears.

You can get them at;
Marty's Auto Paint in Rosedale, Maryland
Address: 7600 Pulaski Hwy, Baltimore, MD 21237
Hours: Closed ⋅ Opens 8AM Mon
Phone: (410) 866-6680

They are also effective to dampen the sheet metal of a amplifier, CD transport, or dac project.

Here is the manufacturer's WEBsite:

http://www.evercoat.com/product-detail/ ... 100116/us/

_________________
Walt


Top
 Profile  
 
PostPosted: July 26th, 2020, 7:20 pm 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1697
Location: Baltimore MD
Speakers sold pretty quickly I guess I did not ask enough


Top
 Profile  
 
PostPosted: July 27th, 2020, 11:15 am 
Offline
User avatar

Joined: December 14th, 2013, 2:19 pm
Posts: 948
SoundMods wrote:
Pelliott321 wrote:
Yes those plastic horns are deadly. Could use a lot of dampening. I am wondering if that Flex paste you see advertised so much would work.
Its expensive $20 for a pint, but dries to a tough rubber consistency

Forget that -- it's reactive. I recommend Q-Pads that are used to dampen automobile panels. They are a lead-impregnated self-adhesive pad that's easily cut with kitchen shears.

You can get them at;
Marty's Auto Paint in Rosedale, Maryland
Address: 7600 Pulaski Hwy, Baltimore, MD 21237
Hours: Closed ⋅ Opens 8AM Mon
Phone: (410) 866-6680

They are also effective to dampen the sheet metal of a amplifier, CD transport, or dac project.

Here is the manufacturer's WEBsite:

http://www.evercoat.com/product-detail/ ... 100116/us/


Thanks for the tip Walt. Found them on Amazon also.

Stuart


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group