DCAudioDIY.com

DC Area Audio DIYer's Community
It is currently March 28th, 2024, 6:28 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 43 posts ]  Go to page 1, 2, 3, 4, 5  Next
Author Message
 Post subject: Speaker cables
PostPosted: October 19th, 2018, 12:32 pm 
Offline

Joined: June 22nd, 2013, 11:00 am
Posts: 1036
Anybody just use speaker wire/basic wire with banana plugs on them?

_________________
I reject your music, and substitute my own.


Top
 Profile  
 
 Post subject: Re: Speaker cables
PostPosted: October 19th, 2018, 1:19 pm 
Offline
User avatar

Joined: February 28th, 2013, 3:31 pm
Posts: 1780
I use 12 ga zip cord or two or four wire jacketed speaker cable with either banana plugs or more recently Speakon connectors which I feel are far superior and not very expensive. The Speakon connectors come in two to eight poles per connector and are locking. Check out the links:

https://www.parts-express.com/talent-sc ... t--101-316

https://www.parts-express.com/audtek-el ... m--100-484

https://www.parts-express.com/audtek-el ... t--100-025

https://www.parts-express.com/neutrik-n ... t--092-198

https://www.parts-express.com/neutrik-n ... t--092-059


Top
 Profile  
 
 Post subject: Re: Speaker cables
PostPosted: October 19th, 2018, 1:49 pm 
Offline
User avatar

Joined: July 24th, 2015, 4:17 pm
Posts: 1701
Location: Parkville, Maryland
Attachment:
Andrew_Heliax_Plenum_Rated_CATVP.pdf [32.22 KiB]
Downloaded 635 times
I cannot put into words the level of improvement I got from my system when I installed plenum-rated Andrew Heliax in my system. I am running 35-feet of the cable under my living room floor from my amps. to my speakers and the quality of sound is as if I am connected with nothing more than a one-foot link. What pisses me off was that it took 15-years for me to dust off the roll I had in my basement and even do a trial. This cable definitely steps out of the way.

_________________
Walt


Top
 Profile  
 
 Post subject: Re: Speaker cables
PostPosted: October 19th, 2018, 2:22 pm 
Offline

Joined: April 22nd, 2013, 12:58 pm
Posts: 285
Are you using in Coaxial mode or are you running two cables per speaker and using the inner conductor for signal and outer conductor as shield?


SoundMods wrote:
Attachment:
Andrew_Heliax_Plenum_Rated_CATVP.pdf
I cannot put into words the level of improvement I got from my system when I installed plenum-rated Andrew Heliax in my system. I am running 35-feet of the cable under my living room floor from my amps. to my speakers and the quality of sound is as if I am connected with nothing more than a one-foot link. What pisses me off was that it took 15-years for me to dust off the roll I had in my basement and even do a trial. This cable definitely steps out of the way.


Top
 Profile  
 
 Post subject: Re: Speaker cables
PostPosted: October 19th, 2018, 2:48 pm 
Offline
User avatar

Joined: July 24th, 2015, 4:17 pm
Posts: 1701
Location: Parkville, Maryland
FerdinandII wrote:
Are you using in Coaxial mode or are you running two cables per speaker and using the inner conductor for signal and outer conductor as shield?


SoundMods wrote:
Attachment:
The attachment Andrew_Heliax_Plenum_Rated_CATVP.pdf is no longer available
I cannot put into words the level of improvement I got from my system when I installed plenum-rated Andrew Heliax in my system. I am running 35-feet of the cable under my living room floor from my amps. to my speakers and the quality of sound is as if I am connected with nothing more than a one-foot link. What pisses me off was that it took 15-years for me to dust off the roll I had in my basement and even do a trial. This cable definitely steps out of the way.



Straight up as co-ax. I have female PL-259 silver/Teflon connectors attached to the floor below the amps. and speakers terminated with twisted 12-gage stranded pig-tails that feed up through the floor to the amps and speakers. The cables are terminated with male PL-259 connectors. You might say that my house is now part of my audio system. :lol:


Attachments:
00 AA Heliax Under Floor.jpg
00 AA Heliax Under Floor.jpg [ 1.14 MiB | Viewed 12913 times ]
00 AA Heliax Speaker Cable Entering Floor.jpg
00 AA Heliax Speaker Cable Entering Floor.jpg [ 816 KiB | Viewed 12913 times ]

_________________
Walt
Top
 Profile  
 
 Post subject: Re: Speaker cables
PostPosted: October 19th, 2018, 3:02 pm 
Offline

Joined: April 22nd, 2013, 12:58 pm
Posts: 285
Makes sense. That's how the cable was designed to be used......


Top
 Profile  
 
 Post subject: Re: Speaker cables
PostPosted: October 19th, 2018, 3:31 pm 
Offline
User avatar

Joined: July 24th, 2015, 4:17 pm
Posts: 1701
Location: Parkville, Maryland
FerdinandII wrote:
Makes sense. That's how the cable was designed to be used......


As it turns out that was the only way to successfully terminate the cable. It is a bitch to terminate. You need a big-ass soldering iron because between the connectors and the copper corrugated shield you find yourself soldering to very efficient heat sinks. It doesn't hurt to use a copper piping cutter and thermal stripper to get the job done. It was definitely worth the effort.

_________________
Walt


Top
 Profile  
 
 Post subject: Re: Speaker cables
PostPosted: October 19th, 2018, 5:37 pm 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1697
Location: Baltimore MD
I was around when Walt did this mod and the increase in demensionality was obvious.
This was one of many pieces of the puzzle Walt is constantly working on in the pursuit of nervana


Top
 Profile  
 
 Post subject: Re: Speaker cables
PostPosted: October 19th, 2018, 6:01 pm 
Offline
User avatar

Joined: July 24th, 2015, 4:17 pm
Posts: 1701
Location: Parkville, Maryland
Pelliott321 wrote:
I was around when Walt did this mod and the increase in demensionality was obvious.
This was one of many pieces of the puzzle Walt is constantly working on in the pursuit of nervana


Unfortunately Nirvana is a fickle bitch. Just when you think she is satisfied her evil twin makes demands. :cry:

_________________
Walt


Top
 Profile  
 
 Post subject: Re: Speaker cables
PostPosted: October 19th, 2018, 8:33 pm 
Offline

Joined: June 22nd, 2013, 11:00 am
Posts: 1036
SoundMods wrote:
FerdinandII wrote:
Makes sense. That's how the cable was designed to be used......


As it turns out that was the only way to successfully terminate the cable. It is a bitch to terminate. You need a big-ass soldering iron because between the connectors and the copper corrugated shield you find yourself soldering to very efficient heat sinks. It doesn't hurt to use a copper piping cutter and thermal stripper to get the job done. It was definitely worth the effort.


Can you make a set for next years C.A.F.?

If the cables are that great, it should make whatever is brought sound better.

_________________
I reject your music, and substitute my own.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 43 posts ]  Go to page 1, 2, 3, 4, 5  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 53 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group