DCAudioDIY.com
http://dcaudiodiy.com/phpBB3/

GROUP POLL
http://dcaudiodiy.com/phpBB3/viewtopic.php?f=4&t=1263
Page 4 of 4

Author:  ratbagp [ October 15th, 2018, 2:23 pm ]
Post subject:  Re: GROUP POLL

Another egg speaker. Smaller than Tom's and 3D printed.

https://makezine.com/projects/3d-printed-egg-speakers/

ray

Author:  mix4fix [ October 15th, 2018, 2:33 pm ]
Post subject:  Re: GROUP POLL

Why not include projects that are sold as kits by other vendors? Still use the same techniques including solder, drill, cut, cover (paint or wrap with carpet/vinyl wrap).

Author:  Stuart Polansky [ October 15th, 2018, 2:35 pm ]
Post subject:  Re: GROUP POLL

The links that Tubedriver posted are very cool!

I've built a few speakers, been frustrated and ticked off a lot.

The PVC speakers really look cool and seem like an excellent, relatively simple project that an adult beginner of any age could tackle.

Find some cheap drivers that would work, maybe incorporate a bipolar tweeter supported above the PVC for the midwoofer. Lots of options to play with and easy to build enclosures.

Big thumbs up here!

Author:  tomp [ October 15th, 2018, 2:57 pm ]
Post subject:  Re: GROUP POLL

ratbagp wrote:
Another egg speaker. Smaller than Tom's and 3D printed.

https://makezine.com/projects/3d-printed-egg-speakers/

ray


From my article:

.Others appear to be taking advantage of a true egg shape. A search on Google for egg shaped speakers will quickly return lots of offerings including from companies such as KEF, Samsung, Fujitsu, Monro, Bofros Tec, Eclipse and others.

Author:  brombo [ October 15th, 2018, 3:15 pm ]
Post subject:  Re: GROUP POLL

Maker Faires are always big on 3d-printing. There are several local ones each year

Here is an example of what is available locally -

https://makerfaire.com/maker/entry/57522/

Author:  brombo [ October 15th, 2018, 4:53 pm ]
Post subject:  Re: GROUP POLL

More food for thought on 3d printed speaker enclosures -

https://www.google.com/search?q=3d+prin ... 12&bih=751

Author:  tomp [ October 15th, 2018, 6:42 pm ]
Post subject:  Re: GROUP POLL

This speaker was at the MWAF in 2016 and was done on a 3D printer. The upper and lower sections used different materials. The person in the photo did this for a Master's thesis.

Attachments:
MWAF Photo 14_small.jpg
MWAF Photo 14_small.jpg [ 157.16 KiB | Viewed 7810 times ]

Page 4 of 4 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/