DCAudioDIY.com
http://dcaudiodiy.com/phpBB3/

Get tubes tested locally?
http://dcaudiodiy.com/phpBB3/viewtopic.php?f=4&t=1251		 Page 1 of 1
Author:  justinis [ September 18th, 2018, 2:14 pm ]
Post subject:  Get tubes tested locally?
I have some old tubes I'd like to get tested (12AX7s and 7591s, mostly). Is there somewhere local I can have this done?

Or does someone on this board have a tester and would be willing to do some testing in exchange for a six pack of cold ones?
Author:  Roscoe Primrose [ September 18th, 2018, 2:16 pm ]
Post subject:  Re: Get tubes tested locally?
Many of us have testers, where are you located?

Roscoe
Author:  justinis [ September 18th, 2018, 2:35 pm ]
Post subject:  Re: Get tubes tested locally?
Petworth in DC

Have car; will travel for tube testing. :auto-biker:
Author:  SoundMods [ September 18th, 2018, 4:15 pm ]
Post subject:  Re: Get tubes tested locally?
justinis wrote:
I have some old tubes I'd like to get tested (12AX7s and 7591s, mostly). Is there somewhere local I can have this done?

Or does someone on this board have a tester and would be willing to do some testing in exchange for a six pack of cold ones?



AHHH! The good old days. Going to Radio & TV repair shop or a Read's Drug Store to test or have tested suspect tubes. I'm in Parkville, MD.

Better yet maybe investing in a tube tester is a better idea. There are plenty available on eBay.
Author:  Grover Gardner [ September 22nd, 2018, 10:49 am ]
Post subject:  Re: Get tubes tested locally?
SoundMods wrote:
justinis wrote:
I have some old tubes I'd like to get tested (12AX7s and 7591s, mostly). Is there somewhere local I can have this done?

Or does someone on this board have a tester and would be willing to do some testing in exchange for a six pack of cold ones?



AHHH! The good old days. Going to Radio & TV repair shop or a Read's Drug Store to test or have tested suspect tubes. I'm in Parkville, MD.

Better yet maybe investing in a tube tester is a better idea. There are plenty available on eBay.


Yes, but you don't know what you're getting. :-) A good calibrated one can run around $500. I lucked into a Hickok 532 ("This was my grandfather's, it lights up, that's all I know.") for $250. The only thing wrong with it was the AC plug, which I replaced. Everything else tested out fine. I also bought a Precision 10-12, which some think are the best testers ever made, but the meter broke in transit. I've got another one on the way as we speak.. Hopefully between the two I'll have a good working model.

The Eico 666's are cheap and reliable. As a matter of fact I have one sitting here that the OP is welcome to for shipping from Oregon. The Eicos have some known quirks but for casual testing they're perfectly fine.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/