A place to discuss member's DIY audio projects & post pictures/schematics. NOTE: There is a limit of 2MB per attachment, and a maximum of 3 attachments per message. If you need to post more than 3 attachments, just add another message.
April 16th, 2018, 4:05 am
After borrowing a DAC, I moved my old DAC (Pop-Pulse) to my desktop computer. I use the optical from the motherboard (Asus) to the DAC, then to a headphone amplifier (Keces) to some old headphones (Sennheisers).
It works fine, but then it has starts to develop static/white noise in the right side. If you reset the PC or reinitialize the output, it will work again. Is there a setting that could cause a conflict?
April 16th, 2018, 5:01 pm
I had two optical "inputs" in Windows. I deactivated the other one that is not used and that seemed to stop that issue.
April 16th, 2018, 5:37 pm
April 19th, 2018, 8:22 pm
It came back. Any thoughts?
April 19th, 2018, 8:51 pm
mix4fix wrote:It came back. Any thoughts?
Hook it back up where it used to be so you can figure out if it's the DAC or the computer driving it...
Roscoe
April 21st, 2018, 5:21 am
I tried hooking up via USB, but can't get it to work.
Am I missing a setting?
April 21st, 2018, 7:52 am
It may need a driver, have you checked and installed it if it does?
April 21st, 2018, 10:17 am
You might try installing ASIO4ALL and see if that helps.
April 21st, 2018, 12:31 pm
Grover Gardner wrote:You might try installing ASIO4ALL and see if that helps.
What settings should I use?
April 21st, 2018, 12:49 pm
mix4fix wrote:Grover Gardner wrote:You might try installing ASIO4ALL and see if that helps.
What settings should I use?
Set your speed to 33-1/3 -- cue your cartridge and enjoy!
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.